NEC N8406-022 - Manual (Page 44)

(English)
22
Additional references
Detailed information about how to configure this product is described in the reference guides listed below. These
guides are contained in the attached CD-ROM.
・ 1Gb Intelligent L2 Switch Application Guide
・ 1Gb Intelligent L2 Switch Command Reference Guide (AOS)
・ 1Gb Intelligent L2 Switch Command Reference Guide (ISCLI)
・ 1Gb Intelligent L2 Switch Browser-based Interface Reference Guide
Product Overview
The features of this product are briefly described below.
Features
The N8406-022 1Gb Intelligent L2 Switch is a Switch Module for the Blade Enclosure. The Switch Module is used
to connect the CPU Blade with the external network through the Ethernet port. The Switch Module has 16 ports
dedicated to CPU Blade, 2 ports dedicated to communications between two Switch Modules that are inserted in
adjacent Switch Module slots, 5 uplink ports, and one port dedicated to management network.
Supported technologies
・ Layer 2 switching
・ VLAN (Port-based VLAN, Tagged VLAN)
- Port-based VLAN
- Tagged VLAN
・ Spanning Tree
- Spanning Tree Protocol (802.1D)
- Rapid Spanning Tree Protocol (802.1w)
- Multiple Spanning Tree Protocol (802.1s)
・ Link aggregation (Port trunking)
- static
・ Uplink Failure Detection (Trunk failover feature)
・ Jumbo frames (up to 9216 bytes)
・ Port mirroring
・ Auto-MDI/MDIX
・ IGMP Snooping (v1, v2)
・ NTP client
・ DNS client
・ Syslog
・ SNMP v1, v2c, v3
・ RMON (Group 1,2,3,9)
・ HTTP/HTTPS server
・ Telnet server/client
・ SSH/SCP
・ TFTP client
・ BOOTP/DHCP client
・ User authentication
- RADIUS
- TACACS+