Nortel Networks 822p - Manual (Page 58)

58 Fine-tuning the Projector
Selecting Projector Setup Options
Use the Extended menu to customize the way you set up the
projector. You can configure the projector for rear and/or ceiling
projection, change the language for the menus and messages, set the
screen background color, capture and store a custom image or logo for
the startup screen.
1. Press the Menu button.
2. Select the Extended menu.
3. Press Enter . Then use the up and down arrow buttons and the
Enter button to set the following options:
■ Display
Messages: Lets you turn screen messages on or off.
Display Background: Sets the screen background to Black ,
Blue , or Logo when no image signal is available.
Startup Screen: Enables or disables display of the startup
screen when the projector is turned on.
A/V Mute: Sets the screen background to Black , Blue , or
Logo when the A/V Mute button is pressed.
■ User’s Logo
Turn on to display the image or logo you have captured
whenever the projector is turned on. See page 63 for more
information.
note
Logo settings cannot be
changed if the User’s Logo
Protect feature has been
turned on. See page 64.