Navini Networks RIPWAVE 40-00460-00R - Manual (Page 25)

Navini Networks, Inc. PMX User’s Guide
Optional
Desktop
Antenna An optional desktop antenna is available for the
PMX. This antenna connects to the PMX and then
sits on a surface next to the laptop. This antenna
should be used if optimal reception cannot be
obtained through the original PMX antenna.
To connect the desktop antenna to the PMX, you must first remove
the original antenna attached to the PMX. To remove the antenna,
turn the antenna down so that it is lying parallel with the PMX.
Grasp the base of the antenna near its connection point and firmly
pull the antenna away from the card. Do not grasp the top or
middle of the antenna as it may break when you try to pull on the
antenna.
Once the original antenna is removed, connect the desktop antenna
by inserting its connector into the port on the PMX card.
Insert the other end of the antenna cable into the base unit.
Base
Note: Avoid frequently connecting and disconnecting the desktop
antenna from the PMX, as this may cause the connector on the desktop
antenna to break.
Page 25
060825_pv1.3_pmx_user_guide_40-00460-00Ra(4.5)