NEC S 5000 - Manual (Page 17)

Models with radio frequency controls
The vacuum can be switched to the
Standby mode during pauses.
^ Press the Standby button at the
handpiece.
The LED at the handpiece lights and
the vacuum turns off.
To turn the vacuum on:
^ Press the Standby button at the
hand piece.
The LED goes out and the vacuum
cleaner turns on to the last selected
power level. The respective symbol on
the hand piece lights green.
^ Press – to select the lowest power
level.
^ Press + to select the highest power
level.
Only use the Standby mode for
short pauses during vacuuming. Do
not leave the vacuum in Standby
mode, there is a danger of
overheating and damage.
Use
17