Niles Audio SYMPTOM SI-2125 - Manual (Page 9)

Bi
Red “Power” LED confirms the amplifier is
connected to a live AC power outlet. (and
that the master power switch is on). Green“Active” LED lights when the
amplifier circuitry has been turned on by
the Turn-On circuits.
Front panel “Master Power” switch turns
off the entire amplifier, including the
Turn-On circuitry. The red “Protect” LED indicates the amp has shut
down because there is a fault in the speaker, the
wiring, or with the SI-2125 itself.
t
w
Main Inputs enable you to route a stereo
line level source to the SI-2125. Cascade Outputs of the main input enable
you to daisy chain multiple amplifiers.
3.5mm Mini Plug socket for
12v DC Control output.
“ Turn-On Mode ” switch
3.5 Mini Plug socket
for voltage input.
9
FRONT AND REAR P
ANEL DET
AILS
DS00354A MY/SI-2125 10/10/03 11:12 AM Page 10