Nextar Q4-03 - Manual (Page 22)

21
When using the unit in vehicle, you can use the supplied mount accessories (mount
bracket, mount cradle and dashboard mount disk) to mount the unit in the vehicle. Take
the following steps to operate:
Fig. 1 Fig. 2 Fig.3
1. See Fig. 1 Follow arrow 1 - slide the mount cradle to fix it to the mount cradle
2. See Fig. 2 Set the bottom edge of the unit onto the mount cradle.
3. See Fig. 3 Fix the unit on the mount cradle, then press the suction cup to the
windshield . Follow arrow 2 - rotate the suction cup lever. At the end, rotate the knob
to adjust the unit to a proper position.
If you want to mount the unit to the dashboard, you can use the adhesive disk:
1) Choose a clean, dry spot on your dashboard.
2) Peel off protection liner from the back of the disk.
3) Attach the disk to your dashboard.
4) Mount the bracket to the adhesive disk.
Use of the Mount
Accessories