Connecting to a computer – Nikon 4.2 User Manual
Page 80
78
Macintosh
D2-Series /D100/D70 (USB Interface)
Connecting to a Computer
Before connecting your camera to a Macintosh computer for the fi rst time, make sure that
you install Nikon Capture 4. After in stall ing Nikon Capture 4, turn the camera on and con-
nect it to the computer, or insert the memory card into a card reader or a PC card slot.
For more information about connecting your camera to a computer, see the doc u men ta tion
pro vid ed with your camera.
D1-Series ( Firewire Interface)
Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure that the battery is fully charged. If in doubt,
charge the battery before use or use an AC adapter (available separately). If the battery is ex haust ed
during transfer, transfer will be interrupted and data may be lost.