Niles Audio AC-8CX - Manual (Page 17)

MAKING CONNECTIONS
Connecting Devices to the AC Outlets
Be sure that the plugs are inserted all the way into the outlet to ensure a proper electrical connection.
To simplify set-up, make a note as to which components are connected to which outlets.
Connecting to Coaxial Lines
For coaxial line connection, use the (1) RG-6 cable included with your AC-8CX to make
connections to your DBS tuner, or any other device requiring a high quality connection. The
premium cable is quad-shielded, has gold-plated F connectors, and will provide superior
performance. Be sure to follow the markings on the AC-8CX that indicate IN (from the signal source),
and OUT (to the component). Your AC-8CX, equipped with iDefinition
™ constant impedance
technology, will provide protection from virtually all types of electrical surges while preserving the
integrity of the source signal. Plus, the coax circuit is fully Cable TV, DSS, DTV and HDTV compatible.
IMPORTANT NOTE
All components in a system must be connected to an iPOWER ™ Power Management System in order for
the system to be protected from electrical disturbances and to realize maximum noise filtration benefits.
This includes AC power cables, coaxial connections, and telephone cables used with pay-per-view
systems. Failure to do this will degrade system performance and leave it vulnerable to electrical damage.
Cable TV
In from grounding
block (connected to
incoming Cable TV
cable).
Out to Cable Box
or TV.
The following is an example of a system utilizing connec-
tions for cable TV. Actual connections may vary depending
upon your system.
14
M
A
K
IN
G
C
O
N
N
EC
T
IO
N
S