Netcomm ns4540 configurations setting, 1. server configuration, 1-1 server general settings – Nortel Networks NS4540 User Manual
Page 34: 1-2 user settings, 1.server configuration, 1-1 server general settings 6-1-2 user settings
NetComm NS4540 Dome Camera User Guide
YML7** Rev1
34
www.netcomm.com.au
6.
6.
6.
6.
6. NETCOMM NS4540 Configurations Setting
NETCOMM NS4540 Configurations Setting
NETCOMM NS4540 Configurations Setting
NETCOMM NS4540 Configurations Setting
NETCOMM NS4540 Configurations Setting
6-1. Server Configuration
6-1-1 Server General Settings
Owner: Specify server owner.
Owner Email: IF Return mail address when using SMTP mail delivery is not specified
correctly, some security SMTP servers may reject the delivery of this mail.
MAC Address: Display MAC addresses information for this NETCOMM NS4540. It's read
only.
Firmware Version: Display firmware version information.
Language: Alternative language option. User may change the language of web contents for
different applications.
Large size image using the true resolution: You can set the Large image to use an interlaced
image, or not.
Live video using: You can select ActiveX for better performance in MS Internet Explorer, or
select Java Applet for more browsers compatibility.
6-1-2 User Settings
6-1-2-1 NETCOMM -NS4540 provides 3- layer user security control as detailed
below
■
"Open for All" is a factory default when no user enters in User Configuration, it allows any
user over the Internet to monitor and configure the NETCOMM NS4540.