Niles Audio DS6300AT - Manual (Page 19)

18
Specifica
tions
Specifications
DS6300AT
Driver Compliment
6-1/2" carbon/glass fiber woofer with short-
ing ring and butyl rubber surround in an
integrated patent-pending pivoting mount,
(15° pivot angle)
1" fluid-cooled ultra-wide dispersion
tri-laminate Teteron dome tweeter in a
patent-pending low diffraction pivoting
mount, (17° pivot angle)
Recommended Amplifier Power
10 to 150 watts per channel
Tone Controls
Bass jumper: flat, -1dB and -2dB
Baffle-mounted Treble controls:
-1.5dB, flat and +1.5dB
Nominal Impedance
4 or 8 ohm selectable
Frequency Response
48Hz to 22kHz, +/- 3dB (on axis)
Sensitivity
89dB for 2.83 volts of Pink Noise
Overall Exterior Frame Dimensions
9-7/8" diameter
Depth Behind Wall
6" deep (based on 1/2" drywall)
Hole Cut-Out Dimensions
8-5/8" diameter
Wiring Requirements
Patented two-piece, no strip speaker
wire terminal, accommodates 12–18
gauge wire. We recommend 16–18 gauge
stranded wire for up to 80 feet, 14 gauge
stranded wire for up to 200 feet.
DS6500AT
Driver Compliment
6-1/2" carbon/glass fiber woofer with short-
ing ring and butyl rubber surround in an
integrated patent-pending pivoting mount,
(15° pivot angle)
1" fluid-cooled ultra-wide dispersion aluminum
dome tweeter in a patent-pending low diffrac-
tion pivoting mount, (17° pivot angle)
Recommended Amplifier Power
10 to 200 watts per channel
Tone Controls
Bass jumper: flat, -1dB and -2dB
Baffle-mounted Treble controls:
-1.5dB, flat and +1.5dB
Nominal Impedance
4 or 8 ohm selectable
Frequency Response
45Hz to 25kHz, +/- 3dB (on axis)
Sensitivity
89dB for 2.83 volts of Pink Noise
Overall Exterior Frame Dimensions
9-7/8" diameter
Depth Behind Wall
6" deep (based on 1/2" drywall)
Hole Cut-Out Dimensions
8-5/8" diameter
Wiring Requirements
Patented two-piece, no strip speaker
wire terminal, accommodates 12–18
gauge wire. We recommend 16–18 gauge
stranded wire for up to 80 feet, 14 gauge
stranded wire for up to 200 feet.