NISSAN Frontier Front Leveling Kit NL221 - Manual (Page 5)

5 ‘05-’06 Frontier Leveling - Kit NL221
g. Align marks on coil spring, upper plate, and
shock. Install upper plate, shock, bushing,
washer, and nut onto coil spring.
h. Ensure marks are aligned along upper plate, coil
spring, and shock.
i. Install kit spacer (upper) onto upper plate.
Washer
& Bushing
Upper Plate
Coil Spring
Nut
Upper Plate
& Coil Spring
Alignment
Mark
Shock
Kit Spacer
(Upper)
Upper Plate
Kit Bolts
(10 x 50mm)
j. Install coil-over assembly onto upper perch with
three kit nuts (10mm stover).
k. Install coil-over assembly onto lower control arm
with nut and bolt.
l. Repeat above steps for passenger side coil-over
assembly.
2. Install sway bar onto two sway bar links with two
nuts.
3. Install front wheels onto vehicle with lug nuts. Snug,
but DO NOT TIGHTEN.
4. Using a hydraulic floor jack, raise front of vehicle
and remove jack stands. Lower front of vehicle onto
ground.
5. TORQUE lug nuts to specification.
Kit Nuts
(10mm
Stover)
Coil-Over
Assy.
Upper Perch
Coil-Over
Assy.
Bolt & Nut
Lower
Control Arm
Sway Bar
& Nut
Sway Bar
Link
Lower
Control Arm