Eizo FORIS FS2331 - Manual (Page 25)

25
Chapter2AdjustingScreens
●
To correct the screen position “Position”
Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose “Position” in the “Screen” menu, and press
.
The “Position” menu appears.
2. Adjust the position with / / / .
3. Press to exit the adjustment.
4. Close Pattern 1.
5.
Adjusting color gradation.
●
To adjust color gradation automatically “Auto Range Adjust”
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”.
2. Choose “Screen” in the Setting menu, and press .
3. Choose “Auto Range Adjust” in the “Screen” menu, and press .
The “Auto Range Adjust” menu appears.
4. Select “Yes” with or , and press .
The output range is set automatically.
5. Close Pattern 2.