Navman iCN 500 series - Manual (Page 18)

18
iCN 500 series | User Manual
G
et
tin
g
st
ar
te
d
5. Memory Card
Your iCN came with a memory card containing a preactivated map of the region in which it was
purchased. To navigate to your destination you will first need to insert the memory card in your iCN.
Important: If any of the files on the memory card are deleted, or if you are using a different memory card
from the one that came with your iCN, you may need to install a language to the iCN internal memory
and install maps to your memory card. To install a language, see Changing Language below; for installing
maps using Smart Desktop on your computer, see Installing Smart Desktop on Your Computer on
page 78 and Installing Maps Using Smart Desktop on page 81.
Inserting Memory Card
Gently insert the card in the SD/MMC slot with the label facing the front of the iCN.
Removing Memory Card
Gently push down on the top edge of the card to release it, and pull it out of the slot.
6. Changing Language
iCN 510
The memory card that came with your iCN 510 contains a selection of languages. As long as this
memory card is inserted in your iCN, you will be able to navigate using any of these languages by
selecting one at the Language screen at startup, or at the Preferences - Language screen (see
page 66).
The iCN 510 can store one language in internal memory, which is UK English by default. If you are
using a different memory card to the one supplied with your iCN, you will only be able to navigate
using this one language. To change the language stored in internal memory, complete Installing a
Language on Your iCN 510 on page 84.