Nilfisk-Advance America P 130.2 - Manual (Page 7)

7
Nilfisk P 130.2 / P 150.2 / P 160.2
EN 3.4 Mounting of quick
coupling
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet fi lter must al-
ways be fi tted in the water inlet
pipe to fi lter out sand, lime stone
and other impurities as these
will damage the pump valves.
Caution: Failure
to fi t the fi lter will
invalidate the
guarantee.

3.5 Mounting of high
pressure
hose
Attach the high pressure hose
(4) to the spray handle (7).
Detach the high pressure hose
by pressing the pawl.
4 Operating your pressure washer
4.1 Connection of high pres-
sure hose
Machines without hose reel: At-
tach the high pressure hose (4)
to the high pressure connection
of the machine (3).
Only max. 7 m additional exten-
sion hose can be added.
Machines with hose reel: Un-
wind the high pressure hose
completely.