Napoleon Grills 485RSIB - Manual (Page 24)

24
www.napoleongrills.com
Cooking Grid Placement: The cooking grid can be placed at two different heights. The lower height is for use with pots
or pans. The higher position is to be used when searing meats. Ensure the burner is off and the grid is cool to the touch
before changing between the two heights. The grid must be at the lower height in order to close the lid.
13. Side Burner Installation
Insert (4) ¼-20 x 5/8” screws through the washers into the threaded holes in the side of the base; do not tighten all the way.
Slide the assembled side burner over the screw heads and finish tightening. Fit the orifice into the burner tube and secure
with the hose retainer clip supplied. Attach the wire from the manifold to the side burner electrode.
4 x N570-0082 (1/4-20 X 5/8”) 3/8”(10mm) 4 x N735-0001 (insulated washer)
WARNING!
The Infrared side burner
is supplied with a drip pan which holds
only a minimal amount of grease. To
prevent grease fires, the pan must be
cleaned after each use.
Fit orifice into burner
tube and secure with hose
retainer clip supplied.
1 x N160-0016 (clip)