NCR 7458 User Manual
Page 55
Advertising
Chapter 3: Hardware Service 3-31
Installing Memory Modules
The 7458 contains two DIMM sockets.
To install the DIMM, follow these steps:
1. Slide the Electronics Tray out of the terminal cabinet and locate the
DIMM socket.
2. Open the latches at the ends of one of the sockets.
19532
Note:
The DIMM can be installed into either DIMM socket.
3. Align the DIMM in the socket and push it straight down (Note that
the DIMM connector is keyed).
17807
4. Ensure that the edges of the DIMM engage the latches and that the
latches are completely closed.
19533
Advertising