Nintendo DSi XL - Manual (Page 37)

The icon will turn yellow
when you tap it.
Tap
straight
down!
71
Applic
ations & S
ettings
72
Applic
ations & S
ettings
Parental Controls (cont.)
What to do if you forget your PIN and secret-question answer…
If you forget both your PIN and the answer to your secret question, please follow these steps.
On the PIN input screen, select I Forgot.
On the next screen, enter the answer to your
secret question.
If you successfully answer the secret question,
proceed with editing your Parental Controls
settings.
If you’ve forgotten the answer to your secret question.
Select I Forgot.
Check Inquiry Number – Please call Nintendo
Customer Service at 1-800-255-3700 and provide
the inquiry number shown here, and the date that
is set on your Nintendo DSi XL. You will then be
issued a master key.
Tap OK.
Enter the master key and select OK.
Master key
Inquiry number
Touch Screen
• If the Touch Screen is not responding properly, first try removing any screen protectors (sold separately)
you may have added to your Nintendo DSi XL.
If you feel the stylus contact point is not aligned correctly, take the following steps to re-calibrate the Touch
Screen. To access the Calibration screen, press and hold the L Button, R Button, and START, then turn the
power on. The calibration screen will be the first screen to display.
How to Calibrate the Touch Screen
Carefully tap the center of .
Calibration points will appear in the upper left
corner, lower right corner, and the center of the
screen. Tap each point to complete calibration.
When Calibration complete appears on the
screen, tap each of the four to confirm.
When you’ve finished confirming calibration,
tap OK to finish.
If you were unable to accurately tap , select
Try Again to restart the calibration process.
Mic Test
Confirm that the microphone is operating properly.
Testing the Microphone
Face the microphone and speak.
Confirm that the volume bar is filling up with
colored bands.
The volume bar will fill with colored
bands when it picks up sound.
Tap Quit when you’ve finished confirming that
the mic is working.