Northern Industrial Tools 1961202 - Manual (Page 2)

Page: 2 of 7
MADE IN CHINA
For technical questions and replacement parts, please call 1-800-222-5381.
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO. INC,
Product! For future reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the
entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment
strongly recommends that this machine is not modified and/or used for any
application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first
contacted Northern Tool + Equipment to determine if it can or should be performed
on the product.
Before using this product, please read the following instructions carefully.
Technical Specifications
Item Description
Drive Size 1/2"
Free Speed 7000 RPM
Max. Torque 300 ft-lbs
Air Consumption 5.6 CFM
Air Inlet Diameter 1/4"- 18NPT
Max. Air Pressure 90 PSI
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep this
manual and invoice in a safe and dry place for future reference.
WARNINGS AND SAFETY RULES
1. Wear proper clothing. Always use ANSI-approved safety impact goggles when
assembling or using this tool. Wear long sleeved shirts, long pants and hard-toed shoes.
Take off any loose fitting jewelry and keep long hair covered to prevent being caught in
moving parts.
2. Wear proper breathing protection. Remember that a “dust mask” is not a breathing
respirator. Use a respirator that uses charcoal filters for the best protection.
3. Keep work area clean and well lighted. A dim and/or cluttered work area invites
personal injury.
4. Keep children and pets away from work areas. Children can be a distraction and
should be supervised by an adult when near the work area. Never allow children to play
with this product even if it is turned off.
5. Store idle tools properly. Keep this tool out of the reach of children.