Nortel Networks 1000BASE-SX - Manual (Page 64)

64 GBIC specifications
Figure 11
GBIC label
General GBIC specifications
The following table describes general GBIC specifications. GBIC ports
for both multimode (MMF) and single mode fiber (SMF) have SC-type
connectors and a minimum cable distance of 2 meters (m).
Table 29
GBIC physical specifications
Parameter Specifications
Dimensions (H x W x D) 0.39 x 1.2 x 2.6 inches (in.)
1.0 x 3.0 x 6.5 centimeters (cm)
Connectors • Multimode: SC
• Single mode: SC
• CAT5 RJ-45
1000BASE-T GBIC specifications
The 1000BASE-T GBIC provides Gigabit Ethernet connectivity using a
single eight-pin RJ-45 connector. The 1000BASE-T GBIC operates at 1
gigabit per second (Gbit/s) and does not support 100BASE-T or 10BASE-T
interfaces.
The part number of this GBIC is AA1419041-E5 for the Ethernet Routing
Switch and the Metro Ethernet Routing Switch.
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, GBIC, and OADM Hardware Components
NN46220-301 01.01 Standard
5.0 1 May 2008
Copyright © 2008, Nortel Networks
.