Nikon D300s - Manual (Page 161)

135
r
Auto white balance is recommended with most light sources. If
the desired results can not be achieved with auto white balance,
choose an option from the list above or use preset white balance.
White balance can be selected by pressing the WB button and
rotating the main command dial until the desired setting is
displayed in the control panel.
Control panel
WB button Main command dial
A The White Balance Menu
White balance can also be adjusted using the
White balance option in the shooting menu
(
0 253).
A
I
(Fluorescent)
Selecting I (fluorescent) with the WB button and main command dial
selects the type of bulb chosen for the
Fluorescent option in the white
balance menu ( 0 253).
A Studio Flash Lighting
Auto white balance may not produce the desired results with large
studio flash units. Use preset white balance or set white balance to
Flash and use fine tuning to adjust white balance.
A See Also
When
WB bracketing is selected for Custom Setting e5 (Auto
bracketing set, 0 289), the camera will create several images each time
the shutter is released. White balance will be varied with each image,
“bracketing” the value currently selected for white balance. See page
120 for more information.