Nikon D300s - Manual (Page 309)

283
U
Choose the flash mode for the built-in flash.
e3: Flash Cntrl for Built-in Flash
G
button ➜ A Custom Settings menu
Option Description
1 TTL
Flash output is adjusted automatically in response to
shooting conditions.
2 Manual Choose the flash level ( 0 284).
3 Repeating flash
The flash fires repeatedly while the shutter is open,
producing a strobe-light effect (
0 284).
4
Commander
mode Use the built-in flash as a master flash controlling
one or more remote optional flash units (
0 285).
A Flash Control Mode
The flash control mode for the built-in flash is
shown in the information display.
A “Manual” and “Repeating Flash”
Y icons blink in the control panel and viewfinder when these options
are selected.
A The SB-400
When an optional SB-400 flash unit is attached
and turned on, Custom Setting e3 changes to
Optional flash, allowing the flash control mode
for the SB-400 to be selected from
TTL and
Manual (Repeating flash and Commander
mode options are not available).