Network Computing Devices WUSB11 - Manual (Page 11)

Wireless USB Network Adapter
15
Instant Wireless ® Series
14
2. Click the radio button next to Search for the best driver in these locations.
Select Include this location in the search:, and enter D:\Drivers in the
location field (if “D” is the letter of your CD-ROM drive. Then click the
Next button.
3. When Windows has finished installing the driver, click the Finish button.
You have now completed the driver installation for
the Wireless USB Network Adapter. To configure the Adapter, proceed
to the next section, “Windows XP Wireless Zero Configuration.”
Figure 6-2
Figure 6-3
Chapter 6: Driver Installation and
Configuration for Windows XP
After connecting the Adapter to your computer, you will install the driver and
configure the Adapter.
1. Windows XP will automatically detect the Adapter. Insert the Setup CD-
ROM into your CD-ROM drive. Click the radio button next to Install from
a list or specific location (Advanced). Then click the Next button.
Important for Windows XP users: Do NOT run the Wireless USB
Network Adapter Setup Wizard. If the Setup Wizard runs automatical-
ly after the Setup CD-ROM has been inserted, click the Exit button.
Figure 6-1
Overview
Driver Installation for Windows XP