NEC MC2400 - Manual (Page 62)

3-12 Configuring Your System
Advanced Chipset Control
Feature Choices Description Your Setting
640 – 768K Disabled
Enabled
If enabled, ISA Master and
DMA cycles are forwarded to
PCI.
Delayed
Transaction Disabled
Enabled
Enable the delayed
transaction mechanism when
PIIX4 is target of a PCI
transaction.
Passive Release Disabled
Enabled
Enable the Passive Release
mechanism on PHOLD#
signal when PIIX4 is a PCI
MASTER.
Security Menu
Note: Enabling the Administrator Password field
requires a password for entering Setup. The passwords are
not case sensitive.
Feature Choices Description Your Setting
User Password is Clear
Set Status only; user cannot
modify. Once set, this can be
disabled by setting it to a null
string, or by clearing
password jumper on system
board (see System Board
Jumpers in Chapter 3).
Administrator
Password is Clear
Set Status only; user cannot
modify.
Set User
Password Press ENTER When the <Enter> key is
pressed, the user is prompted
for a password; press ESC
key to abort. Once set, this
can be disabled by setting it
to a null string, or by clearing
password jumper on system
board (refer to System Board
Jumpers in this chapter).