Netac Tech T600 - Manual (Page 40)

Netac AirTrack T600 Mini Wireless Router
35
8 LAN Page
The AP Router Mode's LAN page, shown in Figure 8.1, allows the user to set the IP address of T600.
Figure 8.1 AP Router Mode - LAN Page
Table 8.1 AP Router Mode - LAN Page Options
Field Description
IP Address
Set the IP address of T600.
NOTE: To configure T600, the user must access T600 from a PC that is on the
same subnet.
Subnet Mask Allow the user to specify a subnet mask. Default: 255.255.255.0.
DHCP Service Disable/Enable DHCP server.
DHCP Start IP Set the starting IP address of DHCP server's IP address. Default: 192.168.1.100.
DHCP End IP Set the ending IP address of DHCP server's IP address. Default: 192.168.1.150.
DHCP IP Release Set the effective time of the IP address assigned by DHCP server.
Figure 8.2 shows the LAN page for Repeater Mode.