Configuring the telnet timeout – Nortel Networks Nortel Secure Router 4134 User Manual
Page 28
28
Commissioning configuration procedures
Table 4
Variable definitions
Variable
Value
[banner1]
An optional parameter that you use to extend
the banner text. If you require the banner text
be more than 255 characters in length, use
banner1 <string>
to continue the banner
text.
[banner2]
An optional parameter that you use to extend
the banner text.
<string>
The banner text that you want to appear in
Telnet sessions. The banner text can be up to
255 characters in length. Use
\n
to begin a
new line within the banner.
Configuring the Telnet timeout
You can configure the timeout value for Telnet sessions. A Telnet session
disconnects if it remains inactive for the configured session duration.
Procedure steps
Step
Action
1
To access configuration mode, enter:
configure terminal
2
To configure the Telnet timeout value, enter:
telnet_timeout <value>
—End—
Table 5
Variable definitions
Variable
Value
<value>
Enter the time in seconds (from 0 to 3600) after
which inactive Telnet sessions automatically
disconnect. The default value is 900 seconds. If
you enter a value of 0 seconds, inactive Telnet
sessions do not automatically disconnect.
Nortel Secure Router 4134
Commissioning
NN47263-302
01.02
Standard
10.0
2 August 2007
Copyright © 2007, Nortel Networks
.