NEC MultiSync LCD8205 - Manual

NEC Display Solutions of America, Inc.
LCD8205 Installation Guide
82” LCD Display Rev 1.2
www.necdisplay.com
Contents:
Product Description and Notes Page 1
Tilt Angle and Rotation Page 1
Ventilation Requirements Page 2
Display Dimensions
Front, Top & Right Side Page 3
Front, Top & Right Side with protective glass Page 4
Rear, Bottom & Left Side Page 5
Dimensions Optional Fixed Wall Mount in Landscape Page 6
Dimensions Optional Fixed Wall Mount in Portrait Page 7
Dimensions Optional Tilt Wall Mount in Landscape Page 8
Dimensions Optional Tilt Wall Mount in Portrait Page 9
Control Codes Page 10
Product Description
Type: LCD Display Screen Surface: Anti-Reflective
Resolution: 1920 x 1080 Dimensions: 75.8”(W) x 44.8”(H) x 5.9”(D)
Aspect Ratio: 16:9 with protective glass: 75.8”(W) x 44.8”(H) x 6.3”(D)
FCC: Class A Weight: 291.0 lbs
Power Consumption: 680W (max) with protective glass: 346.1 lbs
BTU’s: 2320 BTU/hour
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
LCD8205 Page 1 of 10
Max. 20 deg