Nokia BH-503 - Manual (Page 7)

G e t s t a r t e d
7
English
Switch off
To switch off, press and hold the multifunction key for about 5 seconds.
The headset beeps, and the red indicator light is briefly displayed.
■ Pair and connect the headset
Pair and connect the headset with a mobile phone that
has a music player feature
If your phone supports the A2DP Bluetooth profile and has a music player
feature, you can use the phone to make and receive calls and to play
music with the headset.
1. Ensure that your phone is switched on.
2. If the headset has not been previously paired with a device, switch on
the headset. The headset enters the pairing mode, and the indicator
light starts to flash blue quickly.
If the headset has been previously paired with another device, switch
off the headset, and press and hold the multifunction key until the
indicator light starts to flash blue quickly.
3. Activate the Bluetooth feature on the phone, and set it to search for
Bluetooth devices. See the user guide of your phone for instructions.
4. Select the headset from the list of found devices.
5. Enter the passcode 0000 to pair and connect the headset to your
phone. In some phones, you may need to make the connection
separately after pairing. You only need to pair the headset with your
phone once.
If pairing is successful, the headset appears in the menu of the mobile
phone where you can view the currently paired Bluetooth devices.
When the headset is connected with your mobile phone and ready for use,
the indicator light of the headset slowly flashes blue.
© 2007 Nokia. All rights reserved.