Eizo COLOR EDGE CG245W - Manual (Page 12)

12
Chapter 1 Introduction
Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main Menu Item Adjusting/Setting
Color
Brightness
“2-4. Color Adjustment” (page 20)
Contrast
Temperature
Gamma
Advanced
Settings
Hue
Saturation
Outline Enhancer
Gain
Black Level
6 Colors
Color Reset
“3-9. Restoring the Default Setting” (page 31)
Screen
Screen Size
“2-5. Displaying Lower Resolutions” (page 26)
Range Extension
“2-2. Expanding Signal Output Range
[Range Extension]” (page 16)
Analog
Adjustment
Auto Adjustment
“2-3. Displaying Screen Correctly” (page 16)
Range Adjustment
Clock
Phase
Hor.Position
Ver.Position
PowerManager
Power Save
“5-1. Setting the Power Saving [Power
Save]” (page 36)
Indicator “3-8. Sets the brightness of the front buttons
[Indicator]” (page 30)
Menu Settings
Language
“3-5. Setting Language [Language]” (page 29)
Orientation
“3-4. Setting Orientation [Orientation]” (page
28)
Menu Position
“3-7. Setting the Display Position of the
Adjustment Menu [Menu Position]” (page 30)
Tools
Input Selection
“7-2. Connecting More than Two PCs to the
Monitor” (page 41)
Overdrive
“2-6. Configuring moving image
performance [Overdrive]” (page 26)
Mode Preset
“3-1. Enabling/Disabling Mode Selection
[Mode Preset]” (page 27)
Signal Info
“7-4. Displaying Monitor Information” (page 44)
Monitor Info
All Reset
“3-9. Restoring the Default Setting” (page 31)
* The adjusting/setting function on the <Color> menu depend on the selected Color mode( page 21 ). The above table
shows the sub menus when the “Custom” mode is selected (See “2-4. Color Adjustment” (page 20) ).