NEC E1100+ - Manual (Page 11)

– Keep the monitor away from high capacity transformers,
electric motors and other devices which may create strong
magnetic fields.
– Use the monitor in a clean, dry area.
– Handle with care when transporting.
– We recommend to adjust the brightness in a way that the
background raster disappears.
– For ergonomical reasons we recommend not to use the
position of the maximum contrast control.
– For ergonomical reasons the preset size and position is
recommended with the standard signals.
– For ergonomical reasons preset side-pincushion setting is
recommended.
– For ergonomical reasons we recommend using
non-interlaced signals with a vertical refresh rate between
75 and 120 Hz.
– For ergonomical reasons we recommend not to use the primary
colour blue on dark background ( it is difficult to recognise and
produces eye fatigue due to insufficient contrast).
– To separate the equipment from the power source you have
to remove the plug from the inlet socket.
– The power outlet socket should be installed as near to the
equipment as possible, and should be easily accessible.
– We recommend using the power cord supplied with the
monitor. However, if another type of power cord is
required, power cord H05VV-F should be used except in
U.K.
– To clean the CRT surface use a lint-free, non-abrasive cloth
and a neutral cleaner based, non-abrasive cleaning solution
or glass cleaner for best results.
E - 6 Recommended use