Specific safety rules – Northern Industrial Tools 150611 User Manual
Page 8
SPECIFIC SAFETY RULES
1.
Maintain labels and nameplates on the Impact Wrench. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
8
2.
When using the Impact Wrench, always maintain a firm grip on the tool with
both hands (one hand on side handle and one on main handle).
3.
Do not use the Impact Wrench if it has been dropped, damaged, left
outdoors, or immersed in liquid.
4.
To avoid electrical shock, do not pull or carry the Impact Wrench by its
Power Cord or pull the Power Cord around sharp corners or edges. Do not
unplug the Impact Wrench by pulling on the Power Cord. Keep the Power Cord
away from heated surfaces.
5.
To avoid electrical shock, do not handle the Impact Wrench with wet hands.
6.
Keep the Handle of the Impact Wrench dry, clean, free from oil and
grease.
7.
Always turn off the Impact Wrench and unplug the tool from its electrical
outlet before changing accessories or performing any inspection,
maintenance, or cleaning procedures.
8.
Industrial applications must follow OSHA requirements.
9.
Use the right tool or attachment for the right job. Do not attempt to force a
small tool or attachment to do the work of a larger industrial tool or attachment.
There are certain applications for which this product was designed. It will do the
job better and more safely at the rate for which it was intended. Do not modify
this product, and do not use this product for a purpose for which it was not
intended.
10.
WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
11.
WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.