Network Technologies USBV-x - Manual (Page 9)

NTI UNIMUX SERIES USB KVM SWITCH
5
INSTALLATION
1. It is not necessary to turn the CPUs or monitors OFF during this installation.
2.
Connect the cable from a VGA multi-scan monitor to the 15HD connector labeled “MONITOR” on the UNIMUX (See Fig. 3
below.)
Figure 3- Connect a VGA multi-scan monitor
3.
Connect the male USB type A connector on the keyboard cable to either one of the two USB type A female connectors
labeled "DEVICES" on the rear panel of the UNIMUX.
4.
Connect the male USB type A connector on the mouse cable to the remaining USB type A female connector labeled
"DEVICES".
Figure 4- Connect the device(s)
VGA
Multi-Scan
Monitor
15HD Male
Video Connector
15HD Female
Video Connector
Rear View of UNIMUX-USBV-8O-RS
MONITOR
USB DEVICES
CPU 4 CPU 3 CPU 2 CPU 1
CPU 8 CPU 7 CPU 6 CPU 5
8 4 7 3 6 2 5 1 VIDEO VIDEO
R
S
2
3
2
NETWORK TECHNOLOGIES INC Tel:330-562-7070 1275 Danner Dr, Aurora, OH 44202 www.nti1.com
USB Keyboard
USB
Mouse
USB Type A
Male Connectors
USB Type A Male
Rear View of UNIMUX-USBV-8O-RS
MONITOR
USB DEVICES
CPU 4 CPU 3 CPU 2 CPU 1
CPU 8 CPU 7 CPU 6 CPU 5
8 4 7 3 6 2 5 1 VIDEO VIDEO
R
S
2
3
2
NETWORK TECHNOLOGIES INC Tel:330-562-7070 1275 Danner Dr, Aurora, OH 44202 www.nti1.com
USB Type A Female