NEC Express 456-01721-000 - Manual (Page 7)

-3-
Before Unpacking the Cabinet
1. Check the packing list to verify that you have received the
correct shipment.
2. Verify that the Tip-N-Tell and Shockwatch handling indicators
on the outside of the shipping container have not been
activated.
C A U T I O N
!
If you received the wrong shipment or a handling
indicator has been activated, do not proceed
with the unpacking. Contact the vendor from
which you purchased your system and the
shipping carrier immediately.
3. Verify that the area through which you must move the cabinet
has adequate clearance, as the following figures indicate:
•
Figure 2 shows the dimensions of a packaged 38U
cabinet.
•
Figure 3 shows the dimensions of a packaged 24U
cabinet.
•
Figure 4 shows the clearances required at the installation
site.
Include the height of the pallet jack when you calculate the
overall cabinet height.