NETGEAR DG824M User Manual
Page 28
Reference Manual for the Model DG824M Wireless ADSL Modem Gateway
2-6
Connecting the Gateway to the Internet
1.
Connect the DG824M.
a.
Turn off your computer.
b.
Connect the cable (A) from the DG824M ADSL port to your ADSL outlet, being sure to
properly connect the wires as shown in the illustration below.
Figure 2-1: Connect the ADSL Cable
Note: The illustration above depicts a microfilter splitter specifically designed to enable a
phone and ADSL modem to connect to the same phone line wall jack outlet. Do not connect
the DG824B to your ADSL line with a microfilter unless the microfilter specifically designed
for that purpose. Doing so will prevent the modem from establishing a connection to the
Internet. If you have any doubts about this, use only a phone cord to connect the DG824B to
the ADSL wall jack outlet.
Wireless ADSL Modem Gateway DG824M
Phone
DSL
Line
A