NetComm NP642 - Manual (Page 19)

NP642 IEEE 802.11g PCI Adapter 19
YML785 Rev1
III. Advanced
In the Advanced page you can configure advanced settings for the NP642 wireless PCI
Card
Field Description
Encryption: There are four options available: Disable (WEP), Enable
(WEP), WPA and WPA-PSK. The default setting is set to
“Disable”. Enable and Disable refer to WEP data encryption
feature. If Enable is selected, you will be required to select the
Authentication mode from the drop down list. If WPA is selected,
configuration is enabled. Select the “configuration” button.
You will then be prompted with the following pop up window.