Nortel Networks COOLPIX P7000 - Manual (Page 103)

89
Selecting the Focus Area ( A, B, C, D Modes)
More on
Sh
ooting
4
Press the shutter-release button to take the
picture.
• If the camera focuses on the focus area when the
shutter-release button is pressed halfway, the focus area
display turns green and the focus is locked.
• If the camera is unable to focus, the focus area display
will blink. Press the shutter-release button halfway again
to focus.
• If the shutter-release button is pressed halfway while the focus area is not displayed,
the camera focuses at the center of the frame.
• Press the shutter-release button the rest of the way down to take the picture.
B
Subject Tracking
• The digital zoom is not available.
• Set the zoom position, flash mode, focus mode, or menu before registering a subject. If any of these
are changed after a subject is registered, the subject will be canceled.
• During certain conditions, such as when the subject is moving quickly, when there is a large
amount of camera shake, or when there are multiple subjects that look alike, the camera may not
be able to register or track a subject, or the camera may track a different subject. Additionally, the
subject may not be tracked properly depending on factors such as the subject’s size and
brightness.
• In some rare cases of shooting subjects for which autofocus does not perform as expected ( A29),
the subject may not be in focus despite the fact that the focus area lights in green. If you cannot
focus, change the AF area mode setting to Manual, Center (wide), Center (normal) or Center
(spot), or try shooting with focus lock (
A29) by switching the shooting mode to a mode such as
auto mode and refocusing on another subject at the same distance.
• In subject tracking, the monitor is not turned off even when the x button is pressed (A14).
• This feature cannot be used simultaneously with certain features. See “Functions that Cannot be
Applied Simultaneously” ( A108) for more information.
1/250 1/250 1/250 F5.6 F5.6 F5.6