Clear the settings or reset the headset, Battery information – Nokia BH-201 User Manual

Page 7

Advertising
background image

7

If your phone supports last number
redialing with the headset, press
the answer/end key twice briefly
when no call is in progress.

If your phone supports voice dialing
with the headset, press and hold
the answer/end key when no call in
progress, and proceed as described
in the user guide of your phone.

To answer or end a call, press the
answer/end key. To reject an
incoming call, press the answer/end
key twice.

To switch the call between the
headset and a compatible phone,
press and hold the answer/end key.

To adjust the headset volume, press
the volume key up or down.

Clear the settings or reset the

headset

To clear the settings, press and hold
the power key and the answer/end
key over 10 seconds.

To reset the headset if it does not
function properly, although it is
charged, plug the headset into a
charger, and press the power key
and the answer/end key at the
same time.

Battery information

Your headset is powered by a
rechargeable battery. The battery can
be charged and discharged hundreds
of times, but it will eventually wear
out. Recharge your battery only with
Nokia approved chargers designated
for this headset.

Unplug the charger from the electrical
plug and the headset when not in use.
Do not leave a fully charged battery
connected to a charger, since
overcharging may shorten its lifetime.
If left unused, a fully charged battery
will lose its charge over time.

9201029_BH-201_1_en.fm Page 7 Thursday, January 25, 2007 4:15 PM

Advertising