Roberts Radio R9929 - Manual (Page 12)

Operating your radio - search tuning
1. Switch on your radio by pressing the Power button.
2. Select the required waveband by pressing the Band button. The
waveband selected will appear in the display. On FM fully extend the
Telescopic aerial. On MW and LW rotate your radio for best
reception.
3. Press and hold down either the Tuning Up or Down buttons until
the frequency in the display begins to change rapidly. Release the
button.
4. Your radio will scan the selected waveband, stopping each time it
finds a station of sufficient strength. Adjust the Volume control ,
Bass and Treble controls to the required settings.
5. To search for additional stations repeat the above procedure.
Search tuning may be stopped by a single press on either the
Tuning Up or Down buttons.
6. Press the Power button to turn off your radio.
11
Weekend alarm cancel
If you do not wish to be woken by the preset alarm at weekends proceed
as follows:-
1. Repeatedly press and release the Weekend cancel button until the
WEC symbol appears in the display. The alarm will now only sound
on weekdays.
2. Press the Weekend cancel button to switch off this function. The
WEC symbol will be removed from the display