Radio Shack Projection 12-591 - Manual (Page 10)

10
Se
tu
p
• If you do not plan to use the radio for a long time, remove the batteries.
Batteries can leak chemicals that can damage electronic parts.
Setting Time
Your clock attempts to synchronize with the atomic time signal
automatically when you first turn it on and whenever you press RESET.
The reception icon e flashes while it is searching for a signal.
After your clock displays the time, set the TIME ZONE switch to the
local zone (Eastern, Central, Mountain, or Pacific).
If the clock does not find the atomic time signal or when you are out of
the local zone, set the time manually:
1. Slide LOCK TIME/DATE to TIME/DATE.
2. The current time flashes. Press  or  to select the time or
hold down  or  to quick search in 10 minute increments.
. Press SET to confirm and enter calendar mode. The month flashes.
4. Press  or  to select the month.
5. Press SET. The day flashes.
6. Press  or  to select the date.
RESET