Radio Shack 63-991 - Manual (Page 2)

2
set.” AL.SET appears and the hour digits
flash.
3. Repeatedly press or hold down UP to set
the correct hour. The clock announces
the hour as it advances on the display.
4. Press SET to store the hour. The clock
announces “minute set” and the minute
digits flash.
5. Repeatedly press or hold down UP to set
the correct minute. The clock announces
the minute as it advances on the display.
6. Press MODE to finish setting the alarm
time. The clock beeps once.
7. Repeat Steps 1–6 to set alarms 2, 3, and
4.
8. Repeatedly press MODE to return to the
current time.
75+0)";174"%.1%-
7 5+0) "8 1+%' "
#
00170%'/'06
To hear the time, press TALK/LIGHT/SNOOZE .
The clock announces the current time, and
the display lights for about 3 seconds.
To hear the date and see the year, month,
and date, press
SET once. For example, if
you press SET on December 2nd, the clock
announces “Today is the second,” and the
year, month, and date appear. Press
SET
again while the clock displays the year,
month, and date, the clock announces the
current time.
6
740+0)
"
6*'
"#
.#4/
"1
0
"
#0&
"
1
((
1. Repeatedly press MODE until the desired
alarm setting appears.
2. Repeatedly press UP to turn the alarm
on or off. When the alarm is turned on,
the clock announces “alarm (number)
on,” and
Â
(or the currently selected
alarm number) appears. When the alarm
is turned off, the clock announces “alarm
(number) off,” and the selected alarm
number disappears.
3. Repeatedly press MODE to return to the
current time.
4. Set ALARM OFF/ON to ON . The selected
alarm number appears.
5. At the preset alarm time, the clock
announces the time. For example, if you
set alarm 1 to sound at 10:35 AM, the
clock repeatedly announces “Alarm 1,
good morning. It is 10:35 AM,” then
repeatedly sounds a series of four beeps
for about 1 minute. To silence the alarm
sooner, press any key.
6. To turn off all the preset alarms so they
do not sound again, set ALARM OFF/ON
to OFF .
To turn off a specific alarm, repeatedly
press
MODE until the desired alarm
setting appears, press UP to turn off that
alarm, then repeatedly press MODE to
return to the current time.
6
740+0)
"
6*'
"*
174.;
"6
+/'
"
#
00170%'/'06
"1
0
"
#0&
"
1
((
1. To set the clock to announce the time at
the beginning of each hour, press UP
when the current time appears. The
clock announces “hourly report on,” and
U U U U appears. At the beginning of each
hour, the clock chimes and announces
the time.
2. To turn off the hourly report, press UP
again. The clock announces “hourly
report off,” and
U U U U disappears.
#
&,756+0)
"
6*'
"8
1.7/'
Slide VOLUME HI/LO on the back of the clock
toward HI to increase the volume, or LO to
decrease the volume.
7
5+0)
"5011<'
When the alarm sounds, press TALK/LIGHT/
SNOOZE to silence the alarm for about 8
minutes. The backlight comes on and
Æ
appears.
After 8 minutes, the alarm sounds for 1
minute then automatically turns off.
To turn the alarm off sooner, press any key
except
TALK/LIGHT/SNOOZE or slide ALARM
OFF/ON to OFF to turn off the snooze.
To cancel the snooze function before it
begins, slide
ALARM OFF/ON to OFF .
±
"016'"
±
"
• Do not press TALK/LIGHT/SNOOZE to
silence the alarm. Pressing TALK/LIGHT/
SNOOZE during the alarm time activates the
snooze function.
• If you do not press a key within about 30
seconds after turning on the alarm, the
current time automatically appears.