Roland PM-30 - Manual (Page 9)

9
Panel Descriptions
Main Unit: Rear Panel
13 . V-DRUMS Input Jack
Use a single stereo cable (sold separately) to connect the
output from the V-Drums sound module’s PHONES OUT to
this input jack.
For more detailed information with examples of using V-
DRUMS input, refer to “Connections” (p. 10).
14 . LINE IN (L/MONO, R) Jack
Connect V-Drums sound modules and other line-level
devices here. Connect devices with monaural output to the
L/MONO jack.
15 . LINE IN (L/MONO, R) Jack
Connect line-level devices (e.g., synthesizers and sound
modules) here. Connect devices with monaural output to the
L/MONO jack.
16 . LINE IN (L/MONO, R) Jack
Connect line-level devices (e.g., recorders, CD/MP3 players,
etc.) here.
This input also includes RCA phono inputs, convenient for
connecting CD players and similar devices.
Connect devices with monaural output to the L/MONO jack.
17 . LINE OUT (L/MONO, R) Jack
Connect this output to the PA, recording device, or other
such equipment.
* The MODE SELECT switch, equalizer, and MASTER
VOLUME have no effect on this.
18 . SPEAKER OUT (L, R) Jack
Use the supplied cable to connect the satellite speakers here.
* Be sure to use the supplied speaker cables as the connection
cables.
* Connect the included satellite speakers.
* To prevent damage to the equipment, always connect and
disconnect speaker cables with the system power turned off.
Satellite Speaker:
Rear Panel
19 . INPUT Jack
Use the supplied speaker cables to connect the satellite
speakers to the main unit SPEAKER OUT jacks.
13 15 17 18 16 14
V-DRUMS/CH1
CH2
CH3
LINE OUT
SPEAKER OUT
19
PM-30_e.book 9 ページ ２００６年８月１１日 金曜日 午後１０時２０分