Rinnai RC98HPI - Manual (Page 2)

Residential/Commercial Models
Models available in
Natural Gas or Propane
RC98HPi
(Interior)
RC98HPe
(Exterior)
RC80HPi
(Interior)
RC80HPe
(Exterior)
Dimensions W 18.5” (470 mm)
H 26” (650 mm)
D 11“ (279 mm)
W 18.5” (470 mm)
H 26” (650 mm)
D 11“ (279 mm)
W 18.5” (470 mm)
H 26” (650 mm)
D 11“ (279 mm)
W 18.5” (470 mm)
H 26” (650 mm)
D 11“ (279 mm)
Weight 71 lbs (32 kg) 71 lbs (32 kg) 64 lbs (29 kg) 64 lbs (29 kg)
Minimum / Maximum
Gas Rate (Input BTUs)
9,500 (NG) /
199,000
10,300 (LP) /
199,000
9,500 (NG) /
199,000
10,300 (LP) /
199,000
9,500 (NG) /
157,000
10,300 (LP) /
157,000
9,500 (NG) /
157,000
10,300 (LP) /
157,000
Hot Water Capacity Range .4 to 9.8 GPM .4 to 9.8 GPM .4 to 8.0 GPM .4 to 8.0 GPM
Energy Factor (NG and LP) .94 .93 .96 .96
Temperature Range*
(Min - Max)
Residential
Commercial
98° F - 120° F
98° F - 185° F
98° F - 120° F
98° F - 185° F
98° F - 120° F
98° F - 185° F
98° F - 120° F
98° F - 185° F
Standard Digital Controller Built-in MC-91-1
MCC-91-1
MC-91-1
MCC-91-1
MC-91-1
MCC-91-1
MC-91-1
MCC-91-1
New Rinnai Ubbink Polypropylene (PP) Concentric Venting
Engineered Especially for Condensing Technology
Rinnai Condensing Tankless Water Heaters
The safe and cost effective choice in venting
Rinnai introduced the combination of tankless technology and concentric
venting to North America to deliver a high level of comfort, efficiency and safety.
In keeping with our commitment to reliability and safety, Rinnai Condensing
Tankless Water Heaters will utilize concentric venting with a polypropylene
inner pipe that is designed to withstand varying flue temperature conditions
that may be experienced over the life of a condensing product. Rinnai prefers
polypropylene for a safe, cost-effective and aesthetically pleasing product.
Rinnai’s PP concentric venting is the safe solution
• Engineered especially for gas appliance venting
• Positive fit and lock allows for installation assurance
• Two layers of pipe equals two layers of protection
• Seals at every joint expand and contract with weather and temperature
changes, so there’s no flexing or cracking in the venting
• No flammable, messy or harmful glues, cements, or solvents are used
• Concentric venting allows zero clearance from combustibles
Rinnai’s concentric venting is price effective and
aesthetically pleasing
• The extra measure of safety afforded by Rinnai concentric venting
is available at a cost comparable to other venting methods
• Only one pipe run is required which speeds up the installation and
reduces cost and the amount of space required
• Special roof and side terminations create a high-end look
R-CNWH-E-17r3 © 2010 Rinnai America Corporation 40M -04/2010
FoR MoRe inFoRMation on Rinnai PRodUCts additional Rinnai liteRatURe aVailaBle
Rinnai america Corporation
103 International Drive
Peachtree City, GA 30269
toll Free 1-800-621-9419
Phone: 678-829-1700 • Fax: 678-364-8643
Visit our Websites: www.rinnai.us
E-mail: [email protected]
Residential tankless
WateR HeateRs intelligent fiReplaces
diRect Vent
Wall fuRnaces
Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior notice. Local, state, provincial and federal codes must be adhered to prior to and upon installation.
* Factory default temperature is set at 98° F - 120° F - maximum temperature can be set at 140° F. To achieve temperatures over 140° F,
an MCC-91 commercial controller must be purchased separately.
Vertical
Venting
horizontal Venting
Wall thimble for an easy
installation in production
plumbing applications
Roof Discharge
Termination
18" above roof
Roof Flashing
Assembly Flat
Metal Pass
Through Plate
Vent Pipe
Extension