RCA RD2800 - Manual (Page 37)

Lyra Jukebox Features & Menus
Chapter 2 35
How to access the play modes
During navigation mode (you’ve turned on your Lyra Jukebox, but you are using
the menu system and not playing music)
1. Press the MODE button (the MODE SETTINGS menu appears).
2. Press the arrow down button (or soft key 2) or the arrow up button (soft key 3) until
the play mode you want to use is highlighted.
3. Press BACK (soft key 1) to return to the previous screen and the mode selection will
be updated to reflect the choice you made in step 2.
4. To change the current play mode, just press the MODE button during playback.
During playback
1.
Press the MODE button to cycle through the choices (the play mode icons are
updated on the LCD).
Note: No icon appears in the LCD for the Normal playback mode.
Repeat A-B
Repeat A-B enables you to mark a starting point and an ending point during playback —
the Repeat A-B playback mode will only play the segment that you marked. When the
end of the segment (the B point) is reached during playback, the Lyra will start playback
again from the beginning (the A point).
Note: Unlike other playback modes, Repeat A-B is only available during playback
(you can’t access it from the MODE SETTINGS menu).
1. To set up Repeat A-B, start playback – press (play/pause).
2. When the song you’re playing reaches the place that you want to be the starting
point, press A -B (soft key 4). You’ll notice that the icon appears in the LCD
where the other mode icons are displayed.
3. Continue to let the music play. When you reach the end of the segment you want to
repeat, press A-B again (soft key 4). The icon appears in the LCD.
Note: You can only mark A and B points within the same song or track.
4. The Lyra Jukebox will repeatedly play the segment of music you marked. To cancel
A-B repeat and return to normal playback, just press the MODE button.
LyraIB.02 9/4/01, 5:41 PM 35