Ryobi S605D8 - Manual (Page 7)

Page 7
OPERATION
ORBITAL MOTION
Orbital motion is ideal for fast cutting action when removing
old finishes, smoothing rough wood, cutting stock down to
required dimensions, or for finishing surfaces to be painted.
As shown in figure 6, the sandpaper moves in tiny circles
at a very high speed, allowing the sander to move easily.
DUSTLESS SANDING
The dust bag located on the rear of your sander provides a
dust collection system for your sander. Sanding dust is
drawn up through the holes of the cushion and collects in the
dust bag during sanding operation. For more efficient
operation, empty dust bag when half full.
TO EMPTY DUST BAG
■ Unplug your sander.
WARNING: FAILURE TO UNPLUG YOUR SANDER
COULD RESULT IN ACCIDENTAL STARTING
CAUSING POSSIBLE SERIOUS PERSONAL
INJURY.
■ Unzip Dust Bag.
■ Shake dust bag to empty.
■ Zip dust bag up after emptying.
TO REMOVE DUST BAG FOR EMPTYING OR
CLEANING
See Figure 7.
■ Unplug your sander.
WARNING: FAILURE TO UNPLUG YOUR SANDER
COULD RESULT IN ACCIDENTAL STARTING
CAUSING POSSIBLE SERIOUS PERSONAL
INJURY.
■ Slide dust bag retainer from sander as shown by the
arrow in figure 7.
Note: Grooves on dust bag retainer align with grooves
on your sander.
■ Empty dust bag.
TO INSTALL DUST BAG
See Figure 8.
■ Unplug your sander.
WARNING: FAILURE TO UNPLUG YOUR SANDER
COULD RESULT IN ACCIDENTAL STARTING
CAUSING POSSIBLE SERIOUS PERSONAL
INJURY.
■ Realign grooves on dust bag retainer with grooves on
your sander.
■ Slide dust bag assembly into place as shown by the
arrow in figure 8.
Fig. 6
Fig. 7
ORBITAL MOTION
DUST BAG
TO REMOVE
DUST BAG
DUST BAG
RETAINER GROOVES
Fig. 8
GROOVES
ON SANDER
DUST BAG