Cleaning – ROWENTA LISSEA 030014 - 4/03 SH325/335 User Manual

Page 5

Advertising
background image

• Underarms and bikini line :
We recommend using the “Sensitive” Micro-screen on both of these
delicate areas.
- Long hair: use the clippers. Hold the appliance slightly tilted towards you
and move it slowly against the lie of the hair.
- Short hair: use the micro-screen. Hold the appliance at right angles to the
skin and move it slowly against the lie of the hair.
To improve efficiency, stretch your skin with your other hand, in order to
raise the hairs. In this way, you will obtain a closer shave, with little or no
irritation.
If your skin becomes irritated, apply a small quantity of talcum powder.
Wait for 24 h before applying perfume or deodorant under your arms.
4) To stop the shaver, turn the switch back to position O (off). The locking
switch will be actived automatically.
5) Unplug the power supply unit after use and replace the protective cover.

4. CLEANING

Regular maintenance of the shaving head preserves the shaver’s efficiency
and extends its lifespan.
1) Ensure that your shaver is unplugged.
2) Remove the protective cover.
3) Release the micro-screen support by pressing on the locking clips and
pulling upwards (FIG 5). Carefully remove all hair by blowing on and
beneath the micro-screen. Clean the shaving head also, with the brush.
Never use the brush to clean the micro-screen.
4) The blade unit and trimmer should be lightly oiled from time to time
with sewing machine oil or similar. Put the top part of the shaving head
back into place.

5) Put the protective cap back in place on the shaving head.

Important : always clean the appliance’s shaving head after use.

CAUTION ! Do not press against the micro-screen when replacing it.

GB

5

6

7

NOT SH325/335 030014 9/04/03 16:01 Page 10

Advertising