Radio Shack 63-247 User Manual

Atomic wall clock, Check package contents features, Install batteries

Advertising
background image

2

3

4

Thank you for purchasing your Atomic Wall Clock
from RadioShack. Please read this user’s guide before
installing, setting up, and using your new clock.

Atomic Wall Clock

User’s Guide

63-247

Check package contents

Features

• Sets automatically and stays set

• Synchronizes with the U.S. atomic clock in Fort Collins,

Colorado

• Automatically updates for Daylight Savings Time

• Mounts on a wall, or sits on a flat surface

• Displays time in 12 or 24 hour format, date, day of the

week, and temperature in Fahrenheit or Celsius



Install Batteries

Your clock requires 2 AA batteries (not supplied) for
power.

1.

Flip open the stand.

2.

Lift the tab on the battery cover on the back of the

clock.

3.

Insert two AA batteries into the battery compartment,

following the polarity symbols (+ and –) marked
inside.

4.

Replace the cover.

Battery Notes

• Dispose of batteries promptly and properly. Do not

burn or bury them.

• Use only fresh batteries of the required size and type.

• Do not mix old and new batteries, different types of

batteries (alkaline, or rechargeable), or rechargeable
batteries of different capacities.

Battery cover

• If you do not plan to use your clock for more than

a month, remove the battery. Batteries can leak
chemicals that can damage electronic parts.



Display your clock

Using the stand

Flip open the stand on the
back and push it into the slot
at the base of the clock until
it clicks. Place the clock on a
flat surface.

Mounting on a wall

1.

Drill a hole in the wall at the desired location.

2.

If needed, insert an anchor (not supplied) into the

hole. Drive a screw (not supplied) into the hole,
leaving about

3

/

16

in. (4.8 mm) exposed.

3.

Slide the clock’s keyhole slot onto the exposed screw

head.



Set up your clock (Optional)

The clock shows the current time, day of the week, and
indoor temperature. The clock attempts to synchronize
with the atomic time signal automatically when you first
set up the clock and whenever you press RESET. If the
clock does NOT automatically display, do the following:

Stand

Keyhole slot

Quick Start

User’s

Guide

Atomic Clock

Advertising