RuggedCom RS1600 - Manual (Page 70)

RuggedSwitch
™ User Guide
Port RSTP Statistics Menu
The Bridge RSTP Statistics menu is accessible from the Spanning Tree menu.
Figure 41: Port RSTP Parameters Menu
My Switch Port RSTP Statistics Admin Access
Port Status Role Cost RX RSTs TX RSTs RX Configs
1 Disabled 0 0 0 0
2 Disabled 0 0 0 0
3 Disabled 0 0 0 0
4 Disabled 0 0 0 0
5 Link Down 0 0 0 0
6 Link Down 0 0 0 0
7 Link Down 0 0 0 0
8 Forwarding Root 19 0 0 37
<CTRL> Z-Help S-Shell>
Status
The status of the port. This may be one of the following:
Disabled
STP is disabled on this port.
Link Down
STP is enabled on this port but the link is down.
Discarding
The link is not used in the STP topology but is standing by.
Learning
The port is learning MAC addresses in order to prevent flooding when it begins
forwarding traffic
Forwarding
The port is forwarding traffic.
Role
The port’s role. This may be one of the following:
Designated
The port is designated for (i.e. carries traffic towards the root for) its LAN.
Root
The port on the bridge providing connectivity towards the root bridge.
RuggedCom