RCA D32TF20 - Manual (Page 28)

26 Chapter 2
Using the Remote Control
The Buttons on the Remote Control
(0-9) Number Buttons Enter channel numbers and time settings
directly through the remote control. They are also used in the GUIDE
Plus+ system and in the TV menu to make selections.
To enter a one-digit channel, enter a zero first. To enter a two-digit
channel, press the two digits. To enter a three-digit channel, press and
hold the “1” button until “1” and two dashes (– –) appear, then add the
second two digits. Example: to tune to channel 123, press and hold 1
until “1– –” appears, release the 1 button and then press 2 and 3.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver
button in satellite mode for most brands.
Move (Arrows) Used to point to different items in the GUIDE Plus+
system and TV menu and to adjust the menu controls. Also moves the
PIP window when no menus are on the screen.
AUX Puts the remote in AUX mode. Can also be programmed to
operate most brands of an additional remote-controllable component.
Backlight Lights up some of the buttons in the dark.
CH + or CH - Scans up or down through the current channel list. Press
once to change the channel up or down; press and hold to continue
changing channels. In DVD mode, skips chapters for some brands. In the
Guide Plus+ system, scrolls a page of info at a time.
CH CTRL When using PIP, selects the picture window, (that is, the
main or PIP window) to be changed by the CH ^ (channel up) or CH v
(channel down) buttons.
CLEAR Removes any menu or display from the screen and returns you
to normal viewing.
DVD Puts the remote in DVD mode and, if Autotuning is enabled, will
turn on the TV and tune to the correct input channel.
FETCH Turns 16:9 mode on or off in the TV mode.
GO BACK Returns you to the previous channel or previous screen in
the menu system.
GUIDE Brings up and exits the GUIDE Plus+ system. In SAT•CABLE
mode, brings up available on-screen guides for some brands.
INDICATOR Indicates the programming mode when programming the
remote to control components.
INFO Brings up channel information; press again to clear the screen. In
the GUIDE Plus+ system, brings up more program information.
INPUT In TV mode, press to toggle through the available input sources
(VID1, VID2, VID3, FRONT, HiRes, CMPNT, last channel).
MENU Brings up the Main menu and selects highlighted items. In VCR
mode, it functions as a PROGRAM button for most brands.
STOP PAUSE
TV ON OFF
AUX DVD
PIP SWAP CH CTRL
PLAY FORWARD REVERSE
FETCH GO BACK
CH +
CH -
V
O
L V
O
L
SKIP MUTE
INFO
MENU
OK
CLEAR
GUIDE
ANTENNA
1 2 3
4 5 6
7 8 9
0
VCR1
VCR2 SAT•CABLE
REC•VCR+
WHO
INPUT
Indicator
Note: The VCR1, DVD, VCR2, and
SAT•CABLE buttons also turn on most
RCA, GE, and PROSCAN products.