Razor ScreamMachine User Manual
Page 7
7
be different than the color of the product you purchased. The colors
were altered to make the assembly photos easier to follow.
WARNING: Razor highly recommends that you have your Electric
Scream Machine assembled by an experienced, adult mechanic. Many
retailers provide assembly but some charge extra. If your retailer can’t
do the assembly, you can have your Electric Scream Machine
assembled at a bicycle shop for a fee. Although you may have to pay
up to $30 or even more for assembly, it will assure the Electric Scream
Machine is properly put together and adjusted.
ASSEMBLY NOTE: Refer to the list of tools required for assembly
on page three of this manual. If you do not have the proper tools or
understanding of the instructions in this manual, take your bike to a
qualified mechanic for assembly, service or adjustments.
6A. Unbox. Remove contents from box. Remove the foam, bubble-
wrap, cardboard and/or plastic separators that protect the various
components from damage during shipping. Inspect the contents of the
box for scratches in the paint, dents or kinked cables that may have
occurred during shipping. Your Electric Scream Machine was partially
assembled and packed at the factory to prevent shipping damage and
there should not be any problems, even if the box has a few scars or
dents. But if there are, contact Razor at 866-467-2967 to resolve any of
these issues.
6B. Install the fork.
Insert the steering tube into the frame as shown in 2a and 2b. The
steering bushings are preinstalled.
Figure 2a. Figure 2b.
Carefully unwind the handlebar/upper crown assembly so the wires are