Ringdale IP Router - Manual (Page 2)

2
Introduction
The Ringdale IP Router is a local two port
Ethernet IP router which enables IP packets to
be routed from one Network/Subnet to another
on your Local or Wide Area Network, and even
across the Internet if required.
The IP Router is simple to install and can be
configured and remotely managed using the
PeripheralVision
®
software provided.
Use PeripheralVision
®
to create a routing table
which directs the IP packets straight to the
required IP Address, giving greater control over
the operation of the network and aiding the
speedy transmission of data.
Follow the instructions in this guide for quick
installation and operation of your Ringdale IP
Router.
Features
Remote management through Ringdale’s
PeripheralVision
® software
Supports multiple IP Addresses on the same
network
Broadcast Forwarding
Integral all voltage power supply
Extremely low power consumption (3 watts)
Flash Upgradable