Runco VX-44D User Manual
Vx-44d vx-55d
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- RuncoCare™ Standard Two Year Limited Warranty
- Important Safety Instructions
- Compliance Information
- 1. Introduction
- 2. Controls and Functions
- 3. Installation
- 3.1 Remote Control
- 3.2 Quick Setup
- 3.3 Installation Considerations
- 3.4 Installing the Projection Lens
- 3.5 Installing the Optional CineWide Lens Mount
- 3.6 Mounting the VX-44d/-55d
- 3.7 Connections to the VX-44d/-55d and DHD Controller
- Connector Panel Access
- Connecting the DHD Controller to the VX-44d/-55d
- Connecting Source Components to the DHD Controller
- RS-232 Controller Connection
- Connecting 12-volt Trigger Outputs to External Equipment
- Connecting an External IR Receiver to the DHD Controller
- Connecting to AC Power
- 3.8 Turning on the Power
- 3.9 Primary Lens Adjustments
- 3.10 Adjusting the Picture Orientation
- 3.11 Installing and Adjusting the CineWide Anamorphic Lens
- 3.12 Optimizing Lamp and Lens Performance
- 3.13 Working With the Lamp
- 4. Operation
- 4.1 Using the On-Screen Menus
- Figure 4-1 . DHD Controller OSD Menu Structure for VX-44d/-55d
- Main Menu
- Input Source
- Aspect Ratio
- Picture
- Input Position
- Memory Presets
- Information
- Calibration
- Service
- Test Video
- Input Names
- Remote Control
- Display Device - Configure
- Display Device - Auto Calibration
- On the VX-44d/-55d Built-in Keypad (see Figure 2-3)
- On the DHD Controller Remote Control
- What an “Auto Calibration” Does
- Color Space
- Triggers
- Miscellaneous
- Sync Threshold
- HDMI EDID Extension
- Front Panel Brightness
- System Reset
- 4.1 Using the On-Screen Menus
- 5. Maintenance and Troubleshooting
- 6. External Control
- 7. Specifications